Cablu FTP

• Horizontal and building backbone cable.
• Support current and future Category 6 and Category 5 enhanced applications, such as:10 Base-T, 100 Base-T, 1000 Base-T (Gigabit Ethernet), FDDI, ATM

Key features and Standards

• General standards: ISO/IEC 11801 2nd edition (2002), EN 50173 2nd edition (2001),ANSI/TIA/EIA 568-B.2 (2002)

Construction & Dimensions

• Construction: shielded 4 twisted pairs
• Conductor: solid bare copper
• Conductor diameter: AWG 23 (0,55 mm)
• Conductor insulation material: Polyolefin
• Diameter over insulation: 1,15 mm
• Cross web: Polyolefin
• Shield: Aluminum/polyester foil
• Drainwire: AWG 26 solid tinned copper
• Jacket material: FRNC compound
• Outer diameter: 7,30 mm

Pair 1 White-Blue/Blue
Pair 2 White-Orange/Orange
Pair 3 White-Green/Green
Pair 4 White-Brown/Brown
Colour identification according toIEC 60304

Electrical characteristics (at 20°C)
Nominal mutual capacitance at 1 kHz : 50 nF/km
Maximum conductor DCR : 91 Ohm/km
NVP - Nominal Velocity of Propagation : 0.70 c
SKEW – Propagation delay difference (100 MHz) : typical ≤ 15 ns/100m
Mean Characteristic Impedance 4-100 MHz¹⁾ : 100 ± 5 Ohm

¹⁾: According to cable requirements of ISO/IEC 11801 category 6, Sept. 2002.

General and environmental characteristics
Temperature range - operation : -20°C - +60°C
Temperature range - installation : 0°C - +50°C
Minimum bending radius - operation : 29 mm
Minimum bending radius - installation : 58 mm
Maximum pulling tension : 50 N
Flame retardancy : IEC 332-1
Caloric value : 820 kJ/m
Weight (approx.) : 51.0 kg/km
Maximum operating voltage : 48 V rms
Maximum continuous current per conductor (25°C) : 1.4 A